24
2022
-
11
Micro farming machine in the application process to stop maintenance
Author:
The application of micro tillage machine and pastoral management and other agricultural equipment, progress of rural consumption efficiency, great effect, so farmers in the use of micro tillage machine equipment will carefully maintenance, in the end how to approach the correct, please according to the following operation dimension door cozy.
The application of micro tillage machine and pastoral management and other agricultural equipment, progress of rural consumption efficiency, great effect, so farmers in the use of micro tillage machine equipment will carefully maintenance, in the end how to approach the correct, please according to the following operation dimension door cozy.
1, micro tillage machine initiated after the machine to start the first stop 5 minutes of heat engine, in engine heat before adhere to low load operation, never high speed and full load operation and low speed running without load.
2, change the oil on time. The engine is running 20h, engine oil change, otherwise cannot discharge the remaining oil in the body. 20h for oil change, after each 100h for an oil.
3, to prevent overload operation. Launch machine in the running in period can not be full load running, can press the speed 3000r/min, load 50% or so stop running.
4, micro machine equipment to choose appropriate oil. If using the grade of oil is not suitable, will cause the piston ring of the adhesive, burned piston ring; rapid wear of cylinder liner; rapid wear of bearings and other moving parts, shorten the use life of the diesel engine.
5, beware of fuel into the water, dirt. If the fuel is mixed with water and dirt, will lead to the diesel engine operation is not normal or can not work. If the fuel in the water and dirt, should fuel stored in a clean container stop settling for more than 2 hours, and then with a hose or pump and taking the top fuel and oil at the bottom of the container can not be used. Http://www.hthlwgj.com/
6, to adhere to the air filter cleaner. If there is lack of engine power, smoke worsens, is to change the air filter or core. Filter for the first time after cleaning the use of 100 hours, the second is the use of 500 hours, the use of 1000 hours after the change filter, users in the use of time to work on the micro tillage machine records.
Processing method for each component of tillage machine
depth control system is to control the micro farming operation control system and the speed of deep plowing. Mainly by the resistance of the knife, the resistance of tillage knife holder, the resistance of the hinge seat. Common faults are: resistance to the knife deformation caused by the forward direction of operation out of control.
2022-11-24
Causes and how to prevent the safety hidden trouble of micro tillage machine
Ping An Application of micro tillage machine is to ensure that the operator of each micro tillage machine is an important part of the body, it is necessary to cause the attention of each operator.
2022-11-24
The multifunctional micro-tiller produced by our company has the significant advantages of small size, large power, low fuel consumption, complete functions, reliable performance and flexible operation. It can be widely used in mountainous areas, hills, plains, and greenhouses for rotary tillage, deep tillage, ditching and soil cultivation, ridging and furrowing, sowing and fertilizing, tillage, pumping and medicine, etc.
Telephone:
E-mail:
Address:
No.13 Jingsheng Road, Jingkou Industrial Park, Jingkou Street, Shapingba District, Chongqing (Independent Commitment)
Mobile website
